LEFT: 19-46015A Kit shown with 03-1001-D2 Tap Cutter installed. Robot not included. - RIGHT: 19-46015A Kit
Specifications: (Part No. 19-46015A)
The Large Pipe adapter allows the TRY TEK cutter to cut in 18 in. (450 mm) to 36 in. (900 mm) pipe. The Large Pipe Adapter will make your existing TRY TEK cutter more versatile. The TRY TEK Cutter can easily be transformed from 6 in. (150 mm) to 18 in. (900 mm) capacity and back again.
To make it possible for our cutter to do this we have added adjustable skids and an additional rotation gear motor. This new axis closely positions the cutter body where you are cutting, no matter what the diameter of pipe, so the stability can be maintained. Also the rotation is powered by a larger gear motor that is connected to an even larger heavy duty speed reduction gearbox for a substantially greater torque in the rotation axis. This additional axis is hooked up by simply removing the original skids and power cable, inserting the cutter into the brackets and connecting in the new 90 degree cable. This new hookup takes care of any internal electrical changes that will be needed to accommodate the new axis.
Cross slide strength is increased. A new head is supplied to attach onto the front of the cutter. The head is not only larger for greater travel but has a heavier rack and pinion to give greater strength the the cross slide axis.
More cutting power is added by a .9 HP (671 W) geared air motor attached to the head. The speed reduction gearbox on the front of the air motor significantly increases the torque with only a small increase in air consumption.
CONSTRUCTION: The body is constructed of light weight, hard anodized aluminum. The head body and slide are made of stainless steel. Total unit weight is 101 lbs. (46 kg). Shipping weight is 141 lbs. (64 kg).