Robotic Tap Cutter Control Box
(Part No. 19-46038)

Input 120 volt A.C. single phase

Features:

• One control box for the TRY TEK 6 in. (150 mm) Robotic Cutter (Part No. 03-1001-D2) and the TRY TEK Large Pipe Adapter (Part No. 19-46015A)
• Capable of working with a cable reel containing up to 1500 ft. (457 m) of cable. It is recommended that the cable on your reel should be 16 Ga. 5 wire cable; 18 Ga. minimums should be used with this control box.
• The 3 axis controls can be operated by two different methods. Each type of control unit is modular constructed for easy interchangeability. Every box comes supplied with both control units:
       - Joystick - The joystick operates the ram extend and retract axis and the head rotation. The head cross slide (stinger) is operated by a soft touch bat switch.
       - Traditional bat switches - All 3 axis are controlled by soft touch bat switches.
       - Small hand held remote box that joystick or bat switches can be mounted into.
• Remote box is attached to main control unit with an 8 ft. (2.5 M) long cord for greater flexibility during operation.
• Each axis now has it's own AMP meter, so you can tell if the motor is moving into a stall situation.
• The box is ruggedly constructed of stainless steel, with a lifting handle.

Shipping Weight - 37 lbs. (17 kg)